How to clean silica gel

Is the daily maintenance of silicone products, focus, also has its own set of methods.

But how to remove solidified silica gel is rarely understood.

Today, we are going to explain how to use cl-t03, a silicone cleaning agent. It takes about 15 minutes to remove the silicone residue on the metal in four simple steps: material extraction, cleaning, glue removal and cleaning.

How to clean silica gel

Ordinary silicone cleaning agent is as common as washing clothes, using clean water rinsing, or with the cleaning agent into water immersion, rubbing, drying can be dust, oil, to achieve the maintenance effect.

1. Dust removal: silica gel can be completely cleaned with water, and neutral laundry detergent and hand sanitizer can also be used;2, can use alcohol to remove surface oil;

3. Stick silica gel on the clothes. Remove the contaminated parts of the clothes by soaking them in warm water.

4, the chemical solvent xylene silicone softening solution, and then wipe off with a cloth!

5. Use special silicone cleaner and operate according to the instructions.

But for the industrial silicone cleaning agents need to have more attention and strictly in accordance with the use of the method of operation.

Use method of silica gel cleaner

(how to use cl-t03 silicone cleaner is as follows)

1, take materials: wear protective gloves and protective mask, when opening the bottle cap, slowly unscrew the bottle cap, so that the cohesive gas slowly overflow, so as not to splash on the body.

2. Dipping: soak the parts to be cleaned into the product and let stand for more than 15 minutes to soften the silicone or polymer;

3. Degumming: clean the softened silica gel or polymer with the fixture, so that the metal surface is basically exposed;

4. Cleaning: immediately clean the surface of the product with this product or conventional solvent and dry it naturally.

Silica gel cleaner matters needing attention

1. Cl-t03 silica gel cleaning agent is composed of multiple surfactants and organic osmosis agents. It is volatile and must be sealed and stored in a cool and dry place.

2. The used and unused products are recommended to be stored separately to extend the storage life.

3. Wash clothes and eyes with plenty of running water for 15-20 minutes.

See a doctor if you feel unwell.

4. In any case, water shall not be added to the degumming system, because it will prevent the performance of degumming agent, and chemical reaction will occur, affecting the effect.

At the same time, cl-t03 silicone cleaning agent can not be mixed with other cleaning agents.

5. Cl-t03 silica gel cleaner has the ability to dissolve ABS engineering plastics at the same time. Please make sure there is no ABS plastics in the workpiece or it can be dissolved without loss before use.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.