Instant glue

Instant dry adhesive 460 is imported pan-cyanoacrylate rubber raw material, commonly known as quick dry adhesive, instant adhesive.

Single component, low albino, medium viscosity, high transparency, quick curing and quick drying silicone glue at room temperature.

Instantaneous dry adhesive 460 adhesive silica gel and ABS, PC, PVC, PPMA plastic has a good bonding ability, quick silicone plastic adhesive glue commonly used varieties.

Trend of instantaneous dry rubber industry:

The instant dry adhesive formula is usually composed of base material + curing agent + filler + plasticizer + toughening agent + diluent.

Kanglibang instant dry adhesive adopts imported cyanoacrylate, and some auxiliary materials such as stabilizer, thickener, plasticizer, polymerization inhibitor, etc.

Glue should be as far as possible to isolate water vapor, packaging containers should also be small permeability or airtight.

The most commonly used substrate for reactive acrylate (structural) adhesives is methyl methacrylate.

Advantages and disadvantages of instant dry adhesive:

The advantages of instant dry adhesive are fast curing, high adhesive strength, adhesive surface, adhesive surface does not need to be treated strictly.

Instantaneous dry adhesive shortcomings are odor, albino, brittle phenomenon, water, high temperature, short storage period, durability is not good.

Development of instant dry adhesive:

Some other compounds were added to improve the toughness, mechanical properties and environmental resistance of the rubber layer.

The first generation of instant dry adhesive [acrylate structure adhesive (FGA)].

If the added compound does not participate in the reaction during the solidification of the adhesive solution, it only exists in it and ACTS as a toughening agent.

Second generation instant dry adhesive [acrylate adhesive (SGA)].

The added compound can be grafted and copolymerized with monomer and modified from inside the molecule when the gel solidifies.

The third generation of instant dry adhesive [acrylic adhesive (TGA)].

In addition, the photosensitizer and sensitizer are used to replace the peroxides initiator and accelerant.

Usage of instant dry adhesive:

1, clean the surface to be bonded, dust, oil, rust, etc., on the metal, it is best to first rough, the use of silica gel treatment agent to activate the surface.

Dry for later use.

2, the coating is followed by a small drop of follow-up agent, immediately continue, and maintain until the hardening, then the area should not be too large, then the thickness of the layer should not exceed 0.2mm.

When joining, apply the adhesive to one side and then to the other.

3. After use, wipe the container and put the lid on. Store in a cool, dry place or refrigerate.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.