Email: sales@bondsil.com
Tel:
Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China
PEROXIDE AGEN C-16
26 Jul 2021
PEROXIDE AGEN C-16
Products Descripiton
Silicone raw material should be cured at high temperature(170℃).The cured silicone are
characterized by non-toxi，no bad smell，and good anti-yellowing capacity. Widely applied to high
quality required and food grade silicone products. Note:This agent is an inflammable and volatile liquid, Please watch out during work time.
Component
1. Anti-Yellowing Agent 2. peroxide 3. Polysiloxane
Physical Properties (Tested by KE-951U Gel)
Appearance: Milk white or subtranslucent
Specific Gravity(g/cm³)（23℃） 0.9~1.0
Hardness(ShoreA) 49~51
Tensile Strength(Mpa): 10~13
Elongation(%): 500~530
Cracking resistance(KN/m) 24~27
Compression Set %(100℃/22h) ≤5
Processing
Curing Temperature 175℃
Application ratio: 0.8-1.0%
This agent must be added by many times with a small quantity. If not, fewer electrostatic spark
and over heat from barrel will cause material burning during the mixing time, The fire can be put
out by foam extinguisher.
