Email: sales@bondsil.com
Tel:
Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China
Silicone cracked with what glue
19 Sep 2019
Silicone cracked
The requirements of different processes or products are summarized as follows
1, technology: silicone molding to room temperature bonding;
2. The silicone gel is required to stick (pull constantly).
A: method for rapid bonding
First, clean silica gel surface oil, dirt, etc.
Secondly, evenly brush the treating agent cl-16 on the interface of two silica gels to be bonded, and leave it for 5 minutes.
Finally, glue 460 or 603 on the silica gel side evenly, and then fit the two together.
Note: this process is suitable for small area bonding, after bonding, the product is not waterproof, not resistant to high and low temperature, easy to hard, brittle.
B: slow adhesive
First, clean silica gel surface oil, dirt, etc.
Secondly, evenly glue kn-300x or kn-300n on the interface of two silica gels to be bonded, and fix or press the two together for 8~12 hours.
Note: after the bonding process, the product is waterproof, temperature resistant from -60 °C to 280°C above zero, acid and alkali resistant, no hardening, no brittle, and keep the original characteristics of silica gel.
C: method of rapid bonding, using silicone hot vulcanization bonding:
First, clean silica gel surface oil, dirt, etc.
Secondly, evenly apply glue kl-301ab (A:B=1:1) on the interface of silica gel to be bonded, and finally put it into the mold for high temperature pressure and heating.
Note: this product is suitable for unformed silica gel to silica gel or formed silica gel to silica gel. The product can be waterproof with temperature resistance from -60 °C to 280°C above zero. It is resistant to acid and alkali.
KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.
