Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Temperature curing and room temperature curing of silicone PC adhesive glue difference

10 Oct 2019

Heat curing silicone bonding PC than the room temperature cured silicone glue stick PC glue curing time is much faster, up more than a few hours difference, and the temperature of the heat curing silicone glue stick PC ability generally higher, room temperature curing glue and heat-resistant silicone adhesive PC case in 100 degrees or so commonly, heat-resistant situation is not very good, if some customers need heat resistance is very good can see hui rui brand silicone glue, glue heat curing silicone glue stick PC generally also on color and temperature curing silicone glue, glue PC room temperature cured silicone glue stick PC generally have a transparent, black,

Grey, and warm silicone PC glue relative to this is not so many color choice, only black, so these two kinds of glue have advantages, it depends on the customer how to choose.

Cl-24s silicone adhesive PC special instant dry adhesive, product for transparent liquid, is to add molding silicone rubber or liquid silicone rubber and PC (polycarbonate), organic glass and other hard substrate hot vulcanization adhesive.

Can be used for PC, ABS, ceramics, glass, cobblestone and other materials viscosity modification agent.

Single component, single coating, simple process.

Adhesive parts can withstand water, salt spray, chemicals, oils, solvents and other harsh environment.

High bonding strength, can achieve the effect of silica gel tear.

Usage:

1, surface treatment: the base material with mechanical sandblasting or sandpaper polishing degrease, or with solvent chemical treatment, remove oil and dust.

2, glue: brush or dip method, spray method.

3. Drying: dry at room temperature for at least 30 minutes or below 90for 5~15 minutes.

4, stop: glue should be as soon as possible, the best day to complete.

If avoid pollution and contact with high temperature and humidity air, it can be parked for no more than 5 days.

(note: when bonding with products made of plexiglass, brush the treating agent well and brush it again after drying, the bonding effect will be better)

5, sulfur: unvulcanized silicone and the base material mold press vulcanization bonding.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086 -180 9899 4276 Gary Lee

+0086 -135 0281 9396 Wendy Wei

+0086 -138 2374 7978 Kyler Yang

Fax:

+86 755 8147 8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:lamp-magic