Email: sales@bondsil.com
Tel:
Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China
The use method of silicone adhesive
27 Feb 2020
The use method of silicone adhesive is introduced, see below in detail;
silicone adhesive kn-300 series are used as follows:
I. cleaning surface:
Clean the surface of sticky or coated material to remove rust, dust and oil;
Ii. Sizing:
Unscrew the cap of the rubber hose, Pierce the seal with the tip of the cap first, squeeze the glue to the clean surface, and then apply or poor;
Iii. Curing:
When the coated parts are enclosed in the air, the skinning will occur slowly. Any operation should be concluded by the skinning of the surface.
Iv. To be cured:
The curing process is a curing process from the surface to the interior. Within 24 hours (room temperature and 55% relative humidity), the adhesive will be cured to a depth of 2 ~ 4mm. If the part is immersed, especially in the part that is not easy to contact with air, the curing time will be extended.
V. confirmation:
Do not move, use, or package a functional component until it is strong enough;
- After use, some matters need to be given attention to. For details, please refer to "matters needing attention for use of silicone treatment agent".
KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.
