Email: sales@bondsil.com
Tel:
Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China
How do silica gel and metal bond to each other
09 Apr 2025
Silica gel and metal can be bonded to each other through the following steps:
Surface treatment: For metal surfaces, proper treatment is required to ensure good bonding. This typically involves steps such as cleaning, sanding, or sandblasting to remove oil stains, oxides, or other impurities from the surface. For silicone surfaces, it is also necessary to ensure that they are clean and free of dust and oil.
2. Glue: evenly apply a layer of silicone adhesive on the metal surface. Make sure that the glue applied is uniform and not excessive, so as not to affect the bonding effect.
3. Bonding: Align the silicone coated metal with the silicone parts and fit them closely together. During the bonding process, it may be necessary to apply a certain amount of pressure to ensure adequate contact between the two.
4. Cure: According to the instructions of the silicone adhesive used, wait for a period of time for the glue to cure completely. This usually requires a period of standing at room temperature or the use of methods such as heating to accelerate the curing process as needed.
It should be noted that the bonding effect of silica gel and metal may be affected by a variety of factors, such as temperature, humidity, surface treatment, glue selection, etc.
Therefore, in practice, it is necessary to adjust and optimize according to the specific situation to obtain the best bonding effect.
In addition, to ensure safety and reliability, it is recommended to read and follow the relevant operating instructions and safety codes carefully before performing the bonding operation.
