100% Environmental friendly and liquid  HTV mold epoxy resin for molding process and silicone kitchen products

CL-26AB-25 is applied for overmold  platinum addition type silicone overmold onto PC,toughened glass ,etc.which result in a tight bond 

Stable Quality 

3 times repetitive standard tests

Making your silicone products 99% ok rates 

        Survive In Rugged Environment

               Water resistance, anti-salt mist , 

            chemicals resistance, anti-oils, solvent ,etc. 

Good adhesion Strength 

No partial bonding failure 

No primer trace on finished silicone products

     Color :Transparent Liquid or Gel                

Component:A:Gel , B:Platinum Catalyst

Mixing Ratio:A:B=1:1(Use up within 4hours after mixture)

Storage:6 Months  (20℃-25℃ avoid light ,heat and place in dry area)

1, Surface Treatment:Chemical treatment with the substrate , remove oil and dust.

2, Apply The Glue:Mix A and B evenly then apply the primer on the

substrates by brusing , dipping , spraying or screen printing

3, Surface Dry:Heat up with 90℃-130℃ for 10~15minutes.

4, Leavy Dry:The primer -coated substrates should be forwarded to moulding process

with silicone right in the day and avoid pollution and contact with high temperature and humidity.

5, Curing:Join the silicone with primer coated substrates and forward to

moulding process for hot air vulcanization.

                                                                                                1,Keep in dry and shade place and avoid fire and heat  

2,The solvent is volatile,please fasten down the cap after use

3, The steam issued by the solvent is harmful , the working shop should be

fireproof and avoid long time inhalation and contact with skins

4,Lightly Cloudy won’t affect the performance.

5,While curing,  the product should avoid contact with organic

compound which contain  substance like N, P ,S and heavy metallic

anionic compounds like  Sn,Pb,Hg,Sb,Bi,As and  compounds which

contains  acetenyl  Otherwise , the primer will result in bad cure  ,

thus , test for the compatibility of primer with substrates is necessary

 1KG/Bottle

Keep the product sealed and stored at 20℃-25℃ away from light and heat ,shelf life for 3 months