Peel adhesion Adjuster

Metal bonding silicone, plastic bonding silicone, organic silicone adhesive, electronic adhesive, high transparent silicone, leather liquid silicone, self-adhesive silicone, silicone pressure-sensitive adhesive, silicone for optical film, silane coupling

Peel adhesion Adjuster KL-6600 KL-6600 is a fast heat cure type addition type liquid silicone resin, matched with low peel adhesion silicone (PSA)and platinum catalysts in use. Adjust the peel adhesion f

Product Specification:

Model No. : KL-6600
Minimum Order Quantity :   20KGS
Lead Time:7-10 Days
Payment Terms:   T/T, Paypal , Western Union
Package:   20KGS/50KGS/180KGS

Tel: +0086 -180 9899 4276
Fax: +86 755 8147 8872
E-mail: sales@bondsil.com

Inquiry Now

Product Details
Download

Peel adhesion Adjuster KL-6600

KL-6600 is a fast heat cure type addition type liquid silicone resin, matched with low peel adhesion silicone (PSA)and platinum catalysts in use.

Adjust the peel adhesion from 0~30g,High temperature tapings, PET Protective film, Battery protective tapes

Appearance：Transparent or shallow yellow liquid

Viscosity：10~20cps Light transmission：94%

Refractive index：1.48

Solid content：60%

Specifical gravity：0.85g/cm3

High peeling adhesion

Stable peel adhesion

in high temperature&humidity environment

(for example, coated 10 microns stripping force 3g/25 mm)

1.Dented roller coating method:Solid content 24% ,mixing in uniformity with solvent by a weight ratio of P4000:2610B:KL-298:6600:Solvent =1:200:10:40:340

Comma Knife coating method:Solid content 35% ,mixing in uniformity with solvent by a weight ratio of P4000:2610B:KL-298:6600:Solvent=1:200:10:40:160

2. Taking material according to proportion, firstly mix KL298 with solvent evenly ,orderly followed by 6600→2610B→P4000, thoroughly mixture for 20 minutes

3. Defoaming treatment with vacuum by requirements. Coating uniformity of silicone adhesive on the silicone or PET film surface by coating method.

4. Curing : (Example:coating thickness: 10μm) baking for 1 minutes at 130℃.

Attention

1,The solvent is better to choose mixed solvent,Such as xylene:acetic ether:cyclohexanone=80:15:5 or toluene:butanone=1:1
2,The base material surface by adhesive through corona treatment,Cleaning base materials and keep it dry, no dust and oil.
3,Controlling and checking the viscosity during the coating process. Pay attention to have enough quantity for once and make it deeply cured.
4,The mixed silicone adhesive should be used up within 6 hours, if high viscosity happens,should stop using.
5,The adhesive after mixture containing volatile solvent,the work place should be ventilated and workers should wear labor protection tools during the coating process. Away from flame, high temperature and pay attention to static electricity.

Sorry,Here is the product description, there is no data!

Sorry,Here is the product notes, there is no data!

May you like

contact us

Message

Qr code